(6) TRACTORS, COMBINES & HEADS

 

1967 IH Farmall 1206 Turbo tractor, diesel, 18.4-38 rear tires with 9 bolt axle mounted hub

            duals, 11.00-16 front tires, square fenders, 2 remote hydraulic outlets, small 1000 PTO,

5091 hours, SN#15493S-Y

1969 International Harvester 1256 Turbo, diesel fender tractor, 18.4-38 rear tires & 9 bolt axle

mount duals, like new 11.00-16 front tires; 2 remote hydraulic outlets, rear wheel weights, 5294 hours, SN#10446S-Y (nice original work horse)

International Harvester 560 gas Tractor, has 15.5-38 rear tires, 7.50-16 front tires, narrow

front, with loader and 65” material bucket, 4332 hours showing, SN# is painted over--possible 1961 model

 

1974 John Deere 4230 diesel cab tractor, heat & AC, 18.4-34 rear tires, 10.00-16sl front

tires, 540/1000 pto, quad range, 2 remote hydraulic outlets, 8 front suitcase weights,

8236 hours, SN# RW4230H016519R

 

1982 John Deere 4840 diesel cab tractor, heat & A/C, Firestone 18.4-42 rear tires and duals,

            11.00-16 front tires, inside rear wheel weights, 8 speed powershift transmission, 2 remote

            hydraulic outlets, 3 point Quick Coupler; 12 front suitcase weights, 5179 hours, SN#4840P017437   

1978 Allis Chalmers 5020 fender tractor, is 2 wheel drive, diesel, has 2222 hours, SN#2878

 

1979 John Deere 7720 combine, has 30.5L-32 rice & cane tires, 16.9-26 rear tires, 4-wheel

drive, hydrostatic, variable speed feeder house, diesel, cab, extra grain tank extensions,

2 speed chopper, 2612 hours, SN#362309

John Deere 220 grain platform, SN#380031

John Deere 843 corn head, has 2 outside poly snouts, middle snouts are steel, (unknown serial number)

EZ trail 30’ header trailer, green

(10)  front 75# suitcase weights off of IH 06 series tractor

(12)  front 100# suitcase weights off of IH 56 series tractor

(2) 66x43.0x25 Terra TireS, with 8 bolt rims, came off of a John Deere 7720 but can fit other units (real good tread)

3pt John Deere corn head/grain platform carrier

 

 

FARM EQUIPMENT

Level All  pull-type 12’box scraper with hydraulic cylinder and tilt by St. John Welding;

Toreq PTO ditcher, 3pt with rear hydraulic tail, 4 paddle, approximately 39” cutting wheel;

Long backhoe attachment, 3pt mounted, has outriggers & 2 buckets,

3pt pto post hole digger

3pt bale spear

Worksaver 3 pt bale spear

Leon 78” manure bucket

Bush Hog Turf Hog TH72, 3 pt finish mower

Woods RM59, 3pt Rough finish mower, SN# scratched over

John Deere 407 rotary mower, gyramor, 7’ wide, rough, SN#5253UU

Kewanee No.1020 flat fold 18’ disk;  

Landoll Tilloll 875 finish tool, is approximately 18’ model 875-18, flat fold, chopping reel & 3 bar spike harrow, SN#01B9400837

IH 45 Vibra-shank field cultivator, 3pt mounted, approximately 13 ½ foot wide,

John Deere 1760 planter, 8 row 30”, manual fold, vacuum, no-tills, martin row cleaners, corn & soybean disks, 1.6 bushel boxes, insecticide boxes, monitor, SN#H01760R670693

John Deere 455 double disk grain drill, 40 shoe x 7-1/2” (app 25’) hydraulic folding with rubber press wheels, SN# N00455H00166

Kewanee No.470 rotary hoe, flat fold, 3 pt, approximately 26’ wide

New Holland 258, 5 bar parallel hay rake, SN#454720

Lely Hay tedder, 4 basket, manual fold , 3pt, 540 pto,  type 41016, sn#9110691

Vermeer 604 Super J round baler, has monitor, front accumulator wheels, SN#1VRA121T2L1000750

New Idea 364 manure spreader, tandem axle, single beater, hydraulic gate, SN#238804

Yetter 5 shank in-line ripper model 1011, with coulters & heavy duty rear gauge wheels, SN#300

Case 12 shank hi-clear chisel plow, pull type, no cylinder

Case 12 shank chisel plow, standard clearance, with hydraulic cylinder

(2) John Deere approximately 20’ roll harrow with eveners

Pull type drag harrow, folding, 4 tires, approximately 21’

Dearborn 10-158 mounted 3Pt plow, 3 bottom-14”, SN# 9873

HyDrein 3pt mounted 5 bottom plow, furrow gauge wheel, 50,000^th, no model or serial number

Case 5 bottom pull type plow, no serial number

IH #510 in furrow, 6x16 plow, no serial number found

Case 400 plow, 7 bottom 16”, on -land hitch, SN#1601523

Lely Roterra, 20’ wide, updated rolling basket, (don’t know if gearboxes are good), model 11 Lely Roterra, 20’ wide with end transport, old style rolling basket, type 1-162223 SN#810-D514, not sure of usability 623 60 SN#830 0518, older model

10’ Lely Rotterra gearbox only         

Pallet of Lely Roterra parts

Brandt 1060 swing away auger, SN#41497A, flighting worn

A&L model 47 grain cart, 18.4x30 tires, 1000 PTO, side auger

Stankee auger wagon, on a Needler gear, has 11L-15 tires, and hydraulic auger, tarp

 

 

TRUCKS & TRAILERS

1978 Ford 800 grain truck, gas engine, 11R22.5 front tires, 10-20 rear tires, tandem axle with twin screw, a Midwest 20’ Bed with 52”+12” toper sides, hoist,  roll tarp, box is bowed on left side, triple cargo gate, manufacture date of 11-1977;  only 47,618 miles, VIN#M=92524, has recent rebuilt engine

1979 International model 1954 single axle straight truck, has 5+2 transmission, hydraulic brakes, diesel engine, 10.00-20 front tires (good), 10.00-20 rear tires (fair), has 8’ steel flatbed with gooseneck hitch, 119,232 miles, manufactured date of 10-23-1978, VIN#AA195JAA12583

Tri-Star Gooseneck with hoist, has 16’ bed, 40” steel sides, wood floor w/poly liner over top,

Dual cylinder electric over hydraulic hoist, VIN# is  hard to see

Tri-Star Gooseneck trailer, is approximately 29’, has a 9’ hydraulic beaver tail, 92” wide with outriggers, 9.50-16 tires, dual jacks, 8’ over top of gooseneck, VIN# hard to read, several useful homemade additions

OLD Andrews 33’ SEMI box trailer, VIN# P2EM33 1950, aluminum sides, “STORAGE ONLY”

Homemade Ford single axle truck bed trailer

70” x 105” single axle tilting snow mobile trailer, no floor

3 point hitch to pull gooseneck trailer

Gooseneck plates & other trailer adapters

Schuck rear cushion bumper hitch for truck;

 

 

 

SHOP & MECHANICS TOOLS & SMALL FARM RELATED ITEMS

Large-Tall H.D. steel A-Frame with chain hoist; roll-about A-Farme w/winch; Carolina 30Ton hydraulic shop press; Speedaire air compressor; small air compressor; Millermatic 180 mig welder w/autoset; Lincoln 225 amp electric arc welder; Airco 200 “Dip Pack” Mig Welder; Oxy-Acetelyene torch w/cart & gauges; Hydro-Clean HC48-1200-0 Hot Pressure Washer; King 12 speed drill press; Horizontal shop Band Saw;  Airless Paint System; Heavy duty wood top workbenches w/steel frames; service cartMetal iron racks; nice work table from parts room; Several metal shelving units used in the parts room (nice); Wooden parts room shelves/cubbies; wire racks; Shipping paper cutters;

Electric over Hydraulic power buddy (nice);

Approximately 1000 gallon Fuel tank with 12V pump;

Transfer fuel tanks (1 w/hand  pump);

45” x 6’ long steel water tank

44” x 12’ steel water tank,

(2) 200 gallon Walsh saddle tanks;

Clover seeder converted to 12V;

Homelite XL chainsaw; forks, shovels & misc garden tools; Log chains; chain binders; 5’ aluminum dock transition ramp; Pallet of electric motors; pallet of pumps; Gauge wheels; Boxes of Shop Supplies; Rebuilt St. John Welding Concaves & cylinder bars for Combines; plus a lot more farm related plunder still to surface; 

 

 

GRAIN BINS

(to be moved by December 31, 2021 at the owners risk & expense)

Terms on the Grain Bins:

The Grain Bins are situated at 11601 State Route 4 & 10050 Oak Grove School Road, Lebanon, IL and  will be sold immediately after the Machinery Auction. The Bins will need to be moved by December 31, 2021 at the buyer’s expense & risk. The concrete stays with the Real Estate and is not included with the Bins. The buyer of the grain bins will sign a waiver to accept any risk of loss and hold harmless the Seller’s, Auctioneers, Trust, Attorneys, buyers of any Real Estate and/or anyone else associated with this purchase.

21’ Baughman x 6-1/2 rings, narrow corrugation, w/drying floor, electric grain spreader, newer 6” vertical unloading auger & 5HP 220v motor, Butler fan w/gas heater;

(2) 17’ Stor-Mor ventilated all metal grain storage bins x 3 wide rings with perforated metal floors & app 13.25’ tall sidewalls;

18’ x 7 ring grain bin, narrow corrugation w/easy sweep drying floor, 6’ horizontal unloading auger, 2 roof vents & 7-9HP fan w/air stream gas heater;

18’ x 6 ring grain bin, narrow corrugation w/easy sweep drying floor, 6’ horizontal unloading auger, 2 roof vents & 1 HP aeration fan;

18’ x 6 ring grain bin, narrow corrugation w/easy sweep drying floor, 6’ horizontal unloading auger, 2 roof vents & 1 HP aeration fan;

(3) grain bin sweeps (18’, 21’ & 24’)

 

ANTIQUE FARM RELATED

Antique High wheel box wagon, has wood spoke wheels (good shape), has spring seat, front toolbox, clevis hitch, and horse drawn hitch, says Columbus with IHC logo date of 1845, sold by Ohlendorf & Thomas O’Fallon, IL. (This wagon is Beautiful-has been on concrete floor for the last 40 years-verified in the family since 1929); 6’ x 10’ Barge Box wagon w/hoist & wooden extensions on McCormick running gear; Sears & Roebuck running gear; (2) Walking Plows (1 has DEER letters are visible); 2 wheel hog slop cart frame; Bolens 2 wheel garden tractor, model #12 BB01 SN# A49603 w/sickle mower, sultivator & potato plow; 12” wood handle walking plow; 2 handle dirt scoop;  OHIO Pony #11 hexall cutter; Platform Scale; Pitcher Pump; Enterprise stuffer;  Barn Hay fork w/trolley; Hay Knife; (3) wooden chicken coupes; vintage chicken equipment; (5) milk cans; Antique wooden shutters; Horse Tack; wood eveners; wood wagon tongues; Steel wheels; Hand & Buck Saws; Long handle Sythe; IH Pedal Tractor w/pull cart; Vintage farm toys;

 

Auction Conducted By

Mark Krausz Auction Service 4929 State Route 160, New Baden, IL 62265 IL Lic #440000142 618/588-4917  www.biddersandbuyers.com/ads/krausz.htm Mark Krausz  618/588-4917    MEMBERS OF ILLINOIS STATE AND NATIONAL AUCTIONEERS ASSOCIATION

Click Here For Krausz Auction Calendar